Custom protective packaging · Oak Ridge, Tennessee · Since 1991 (865) 481-3801

Medical equipment packaging

Injection molded cases for medical equipment.

A supplied hard case with a place for every component.

Vol Case supplies Pelican, SKB, NANUK and Condition 1 cases and designs custom foam for medical devices, demonstration equipment and field kits. We work with medical equipment manufacturers from pilot builds through repeat production. Cases and foam are available to companies nationwide.

Plan case selection

Free design & quoting. No obligation.

Case brands we work with
  • Pelican
  • SKB
  • NANUK
  • Condition 1
Black molded cases stacked on a wooden pallet.

Case, foam or both

Order an empty case, a foam insert for an existing case, or a complete case and foam package.

Organized equipment

Give the device, cables, probes and accessories defined places with room to grip and remove them.

Repeatable layouts

Review the design as equipment develops and retain approved production information for later orders.

Ways to order

Choose the case and foam you need.

Case with custom foam

We help choose an available case model and design its interior for the equipment, accessories and packing sequence.

Foam for an existing case

Tell us the case model, interior dimensions and condition. We check the usable space before designing a new insert.

Explore custom foam inserts

Case only

Order a supplied shell without a custom interior. We confirm the selected model, features and availability for your order.

Compare supplied case ranges

Equipment support

Support the device and leave delicate features clear.

The foam needs to hold each item at suitable contact points. We use the device shape and weight to plan its pocket, including areas that must remain clear of pressure.

  • Screens, controls and connectors

    Relief areas can keep foam away from screens, switches, connector pins and other delicate features while the main body remains supported.

  • Pockets at the right depth

    Stepped, angled or curved pockets can support devices that do not have a flat underside. We review the space above each item as well as its footprint.

  • Lid and base clearance

    When parts are stored in both halves of the case, we plan their retention and clearance together. Lid-mounted items should not contact the equipment below when the case closes.

Open black case with shaped foam compartments and a pink insert.

Case selection

Choose the shell for the complete kit.

An available case must fit the equipment and foam while providing the features your team needs to move, open and store it.

Usable interior space
List every device, accessory, cable and spare. We account for lid and base depths, foam thickness, corner shapes and the space needed to grip each item.
Loaded weight and handling
Plan the weight of the complete kit, not just the empty case. Handles, wheels and telescoping handles depend on the model. Consider who will lift the case and where it will be rolled.
Route and storage conditions
Describe moisture, dust, temperature changes and air transport. We review the selected model's documented ratings and pressure-equalization features, plus any testing required for the finished package.
Access and closure
Review latch operation, locking points, label locations and the space needed to open the lid. Identify any parts that must be reached without removing the entire kit.

Case construction and features vary across brands and ranges. We confirm the selected model and its availability before proceeding.

Your options

Choose foam for support, access and material requirements.

The interior should hold the equipment at appropriate contact points and make it practical to check, remove and replace each item.

Materials and fabrication

  • PE, PU and XLPE foam

    We offer polyethylene (PE), polyurethane (PU) and cross-linked polyethylene (XLPE) in different densities and colors. Share any material or cleaning requirements so we can review the proposed foam grade.

  • CNC routing and waterjet cutting

    All foam is cut using a CNC router or waterjet. The method is selected based on the foam type and pocket features. PU foam is waterjet cut.

  • Anti-static foam

    Anti-static foam options are available to meet any electrostatic discharge requirements.

Packing and removal

  • Hand and finger access

    Leave room to grip each part at the right place without pulling on a cable, connector or delicate feature.

  • Trays and lid storage

    Removable trays or retained lid storage can separate equipment and spares where case depth allows. We review the loaded weight, access sequence and retention of each item.

  • Labels, guides and dedicated pockets

    Labels or a packing guide can help identify component locations. Dedicated pockets separate cables, probes and replacement parts so the team can check the kit before closing it.

Common applications

Portable devices, demonstration equipment and complete kits.

We plan the interior around the equipment list and how the kit will be packed. The medical kit study below describes one completed project.

Portable diagnostic equipment

For equipment such as ultrasound units, vital-sign monitors and defibrillators, identify safe support areas and clearance around screens and connectors. Include probes, cables and power accessories in the layout.

Demonstration and field equipment

Organize the main device and the accessories needed to set it up. Plan the removal sequence, space for returning cables and a way to check that the kit is complete before it travels again.

A 28-component deployable medical kit

For a medical system manufacturer serving a military end user, we consolidated three cases into one Pelican 1780. CNC-routed PE foam organized 28 components in the base and lid, and the approved design was repeated across 65 units. The loaded kit weighed about 85 lb, so handling was part of the design decision.

Read the medical kit case study

Our process

Develop the layout and carry it into repeat production.

Design and quoting are free, with no purchase obligation. We work through fit and usability before you approve the design for production.

  1. Review the current equipment

    Provide the component list, dimensions or CAD, weights, intended use and delivery needs. Identify parts still changing and any material, cleaning or test requirements.

  2. Select the case and review the layout

    We choose an available shell and prepare the foam design for review. Check the component positions, support, hand access and packing sequence.

  3. Check fit and approve

    We help determine which fit checks are useful for your equipment. A physical prototype is optional and quoted separately. We revise the design from your feedback before approval.

  4. Build and plan later orders

    We retain approved designs and production information for repeat orders. Identify the equipment version each time and tell us about replacements or upgrades. We confirm case availability and review changes before building further units.

Timing depends on case availability, materials, design changes, quantity and approval. Tell us about pilot builds, later production quantities and staged deliveries when planning the project.

Case base with circular and rectangular recesses in a foam insert.

Frequently asked questions

Medical injection molded case questions.

Contact us to discuss product selection, design requirements or an order.

Share the cleaning agents, concentrations, methods and material restrictions that apply. We review the selected case and proposed foam grade against those requirements. A material name alone does not establish sterility, antimicrobial performance or suitability for a particular clinical process; any required validation needs to be identified before approval.

Tell us about your project

What do you
need to protect?

Tell us what you need to pack, how it will travel and when you need it. We can help you choose a case, foam insert or wood crate.

  • Free design and quoting
  • Direct access to our team
  • No obligation to purchase
Prefer to talk?(865) 481-3801

Start your project

Provide a general project description. Do not include CUI or export-controlled information.

PDF, images, CAD files, or ZIP. Up to 5 files, 20 MB each. ZIPs may contain up to 20 files, totaling 20 MB when opened. No password-protected or nested ZIPs.

Use non-sensitive sample files only. Do not attach CUI or export-controlled technical data. Contact our team to arrange an approved transfer method.