Custom protective packaging · Oak Ridge, Tennessee · Since 1991 (865) 481-3801

Nonradioactive equipment packaging

ATA cases for nuclear industry equipment.

Custom cases for instruments moving between facilities and field sites.

Vol Case builds custom ATA road cases for nonradioactive monitoring, inspection and control equipment used in the nuclear industry. We design the enclosure, interior and access around the equipment and its handling needs. We supply cases to companies nationwide. We do not package radioactive material.

Plan your case

Free design & quoting. No obligation.

Tall closed black case with metal edging, viewed from a rear corner.

Equipment-specific support

Plan contact points and clearance for sensitive instruments, fittings and accessories.

Access for regular use

Choose openings, trays and shelves for loading and reaching the equipment.

Repeat orders and repairs

Retain an approved design for later cases, review equipment changes or ask us to assess a worn case.

Case construction

Build the case around the equipment.

An ATA case uses wood or plastic panels, metal edging and hardware to create a custom enclosure. We choose the panel thickness, finish and hardware for the equipment weight and intended handling.

  • Edges and corners

    Aluminum edging joins and protects the panel edges. Ball corners protect exposed corners during handling.

  • Recessed hardware

    Recessed handles and latches limit protrusions. Their positions need to work with the openings and the supports inside the case.

Explore ATA case construction
Open tall black case with foam-lined interior and casters.

Equipment and handling

Plan loading configuration.

Measure the equipment as it will travel, including accessories and any protective bags. The loaded weight, lifting method and room available to open the case affect the design.

Support and no-contact areas
Identify where the instrument can rest or be secured. Show probes, fittings, connector pins and other protruding parts that must remain clear of the foam or case.
Loading and access
Tell us how the equipment will be lifted and which items are needed first. Identify any access required while it stays in the case and the room needed to remove covers.
Transport and storage
Describe vehicles, doorways, floor surfaces, storage time and exposure to moisture or temperature changes. If parts are bagged before packing, include that material in the fit review.
Materials and project requirements
Provide required materials, cleanliness limits, markings and transport tests at the start. Include the applicable specifications and revisions so we can review the actual case and interior.

Your options

Choose the interior, openings and handling features.

Each option has a practical job. We combine them around the equipment and the people who will pack, move and unpack it.

Support and organization

  • Foam lining and fitted cutouts

    Foam can line the case or form pockets around individual devices and accessories. PE, PU and XLPE are available in different densities and colors. We choose CNC routing or waterjet cutting to suit the foam and pocket features; PU foam is waterjet cut.

    Explore custom foam
  • Dividers, trays and shelves

    Separate cables, tools and spare components from the main instrument. Trays and shelves can keep items accessible at different levels.

  • Static-sensitive electronics

    Anti-static foam options are available to meet any electrostatic discharge requirements.

Open, move and store the case

  • Hinged lids and removable panels

    A hinged lid stays attached when opened. A removable lid or side panel can provide a clear path to load the device or reach its controls.

  • Latches and locks

    Choose closure hardware for the opening and handling plan. Tell us if locking provisions are required so we can review the available options.

  • Handles and casters

    Options include spring-loaded or telescoping handles and swivel or recessed casters. We choose their arrangement for the loaded weight and how the case will be carried or rolled.

  • Stacking

    Stacking cases allows for more efficient packing in warehouses and trucks. If stacking is needed, we can discuss the stacking configuration and add caster cups to the design.

Common applications

Cases for nuclear-industry instruments and service equipment.

These examples describe nonradioactive equipment we can plan around. Each design follows the actual load, support points and handling instructions.

Monitoring and detection systems

Plan support for sensors and measurement instruments while leaving probes, connectors and exposed controls clear. Include the manufacturer's handling limits and any checks required after transport.

Read precision instrument packaging guidance

Robotics and inspection tools

Identify the transport position of robotic arms, cameras and inspection devices. Include detachable parts, mounts and the clearance needed to lift equipment out of the case.

Control and electronic systems

Separate control panels, circuit boards and associated modules from loose cables and hardware. Identify suitable support surfaces and parts that need individual pockets.

Field and calibration instruments

Keep measurement devices, reference pieces, leads and service tools organized for movement between field and laboratory locations. Arrange items in the order they are removed and repacked.

Our process

From equipment details to an approved case.

Design and quoting are free, with no purchase obligation. We work through the case size, access and interior before you approve production.

  1. Share the equipment details

    Send dimensions, weights, drawings or photographs, quantities and the required delivery date. Include the handling, material, cleanliness and test requirements that affect the packaging.

  2. Review the design

    Check the openings, supports, foam layout and hardware positions. Confirm clearance around delicate features and any bagged parts, plus room to load and remove the equipment.

  3. Check and approve

    We revise the design from your feedback. If a physical prototype would help check fit or handling, we quote it separately. You approve the final design before production.

  4. Build and retain the design

    We build from the approved design and retain it for later orders. Tell us about changes to the equipment, accessories, protective bags or packing sequence before reordering.

Production timing depends on the design, materials, quantity and approval date. Share the delivery schedule early so we can review it with the project.

Open black case with a wooden ramp secured upright inside.

Frequently asked questions

Nuclear-industry ATA case questions.

Contact us to discuss product selection, design requirements or an order.

No. We do not package radioactive materials. We design cases, foam inserts and crates for nonradioactive instruments, components and machinery used in the nuclear industry.

Tell us about your project

What do you
need to protect?

Tell us what you need to pack, how it will travel and when you need it. We can help you choose a case, foam insert or wood crate.

  • Free design and quoting
  • Direct access to our team
  • No obligation to purchase
Prefer to talk?(865) 481-3801

Start your project

Provide a general project description. Do not include CUI or export-controlled information.

PDF, images, CAD files, or ZIP. Up to 5 files, 20 MB each. ZIPs may contain up to 20 files, totaling 20 MB when opened. No password-protected or nested ZIPs.

Use non-sensitive sample files only. Do not attach CUI or export-controlled technical data. Contact our team to arrange an approved transfer method.