Custom protective packaging · Oak Ridge, Tennessee · Since 1991 (865) 481-3801

Nonradioactive equipment packaging

Wood crates for nuclear industry equipment.

Plan support, loading and storage around the equipment.

Vol Case designs and builds ISPM-15 certified custom wood shipping crates for nonradioactive instruments, detection systems, machinery and components used in the nuclear industry. We plan the base, supports and openings around the load and its journey. We supply crates to companies throughout the eastern United States. We do not package radioactive material.

Free design & quoting. No obligation.

Closed wooden crate with reinforced edges, metal latches and yellow feet.

Support for the equipment

Plan the base, blocking and restraints around suitable contact points and the loaded weight.

Access at both ends

Choose openings and handling features for loading, inspection and unpacking at the receiving facility.

Packing requirements

Review moisture protection, material restrictions, identification and required checks before design.

Ways to order

Choose where and how the crate is assembled.

A completed crate

Have a crate built to the approved dimensions and delivered ready for loading. Confirm the access and handling equipment available at your facility.

On-site crating

For suitable projects, we can plan crating at your facility when the load is difficult to move, a completed crate is too large to deliver or the packing needs specialized tools and skills. This can include waterproof barrier bagging with desiccant.

Explore on-site crating

Knocked-down supply

A crate supplied in separate sections takes up less space before it is needed. We plan the assembly method and explain how the equipment will be loaded and secured.

Base and supports

Hold the load at suitable support points.

A custom wooden crate needs to hold the equipment in place as well as enclose it. We design the base based on the equipment weight and handling requirements. Then we add supports and blocking where the equipment can safely rest or be secured.

  • Base and lifting clearance

    We design the base for the equipment’s weight, where that weight sits and how it will be lifted. All our crate bases provide clearance underneath for forklifts and pallet jacks.

  • Blocking, bracing and cradles

    Supports follow the load's shape and strong points. We can use blocking, shaped cradles, bolts, bands or straps where the equipment allows them, with padding at suitable contact surfaces.

  • Clearance around sensitive features

    Keep supports clear of probes, fittings, exposed sensors and other parts that cannot carry weight. Allow space for protective bags and for equipment to be lifted out without catching on protruding features.

Explore wood crate construction
Open narrow wooden crate with a fully lowered loading ramp.

Shipment planning

Plan loading configuration.

We need to know how the load will be packed, moved, stored and opened at its destination.

Dimensions, weight and balance
Provide full dimensions, weight and the center of gravity if known. Include fittings and separate components, plus drawings showing suitable support and attachment points.
Loading and unloading
Identify the forklifts, pallet jacks, cranes or other handling equipment available at both ends. Include doorway limits, loading direction and any parts that must remain accessible after packing.
Transport and storage
Tell us the route, transport modes, storage period and exposure to moisture or temperature changes. Include orientation, stacking and return-shipment requirements.
Materials, cleanliness and documentation
Share material and cleanliness restrictions, required tests and markings. Include destination and receiving-site requirements. Arrange approved transfer before sharing controlled technical information.

Wood treatment and identification

Prepare the crate for the shipment requirements.

ISPM-15 treatment and stamp

All wood crates we make are ISPM-15 certified and stamped. This addresses wood treatment and marking. Customer packing specifications, requirements for the equipment and other destination rules need separate review.

Handling and identification markings

We can add painted callouts, part numbers, handling instructions and other specified identification. Provide the required wording and placement, including any center-of-mass or lifting information.

Your options

Choose protection, access and restraint options.

We select these features for the load, handling equipment and expected reuse.

Protection during shipping and storage

  • Waterproof barrier bagging

    A wood crate alone does not seal out moisture. To protect equipment during shipping and storage, we enclose the equipment in a waterproof barrier bag, remove excess air and seal the bag with desiccant inside to absorb residual moisture.

  • Skidmates

    Skidmates add cushioning beneath the crate base. We review their suitability for the equipment weight and handling plan.

  • Fitted foam

    We can design custom foam for contact surfaces and component pockets. Anti-static foam options are available to meet any electrostatic discharge requirements.

    Explore custom foam

Loading, restraint and reuse

  • Removable panels and latches

    Removable walls or tops provide room to load and unload. Latches allow the crate to be opened and closed again when the construction is designed for reuse.

  • Ramps and wheel chocks

    For wheeled equipment, we size and support a ramp for the load and wheel positions. Wheel chocks can help locate the equipment once inside, alongside the required restraints.

  • Four-way entry

    We can discuss forklift access from four sides when the base and load allow it. Tell us which directions the handling equipment must approach at each location.

  • Eye bolts and D-rings

    These fittings can provide attachment points where the design calls for them. Their purpose, position and load requirements must be determined for the crate; do not assume every fitting is a lifting point.

Common applications

Crates for nonradioactive instruments and larger assemblies.

These are equipment groups we can review, not standard crate designs. Dimensions, support points and handling requirements determine the packing approach.

Detection and monitoring systems

Plan support for the main assembly and separate locations for sensors, cables and accessories. Identify projecting parts and surfaces that must remain clear of the supports.

Laser and precision sensor assemblies

Use the manufacturer's handling instructions to identify suitable contact areas and transport positions. Allow clearance around optical surfaces, probes and connectors. Share any required calibration checks after transport.

Machinery and associated components

Review the weight distribution, lifting points and access needed for bulky equipment. Decide which components can travel together and which need separate support or their own crate.

Read large transport packaging guidance

Our process

Review the crate and packing plan before production.

Design and quoting are free, with no purchase obligation. We review the equipment, packing location and shipment details before you approve the work.

  1. Review the load and requirements

    Provide the equipment details and shipment requirements from the planning checklist. Confirm the packing location and any site access or cleanliness restrictions. Arrange approved transfer before sharing controlled information.

  2. Review the design and packing location

    Check the base, support points, restraints, openings and any barrier bagging. We determine whether to supply a completed crate, deliver sections or plan work at your facility.

  3. Approve before production

    All openings, supports and lifting access are designed and approved by you before production begins. A physical prototype is optional and quoted separately if needed.

  4. Build and coordinate delivery

    We build from the approved design and coordinate the packing and receiving schedule. For repeat orders, identify the equipment version and any changes to the load or shipment requirements.

Timing depends on design, materials, quantity, site arrangements and approval. Discuss storage and staged delivery if completed crates are needed at different times.

Small wooden crate with metal fastening clips around the lid and sides.

Frequently asked questions

Nuclear wood crating questions.

Contact us to discuss product selection, design requirements or an order.

No. We do not package radioactive materials. We design cases, foam inserts and crates for nonradioactive instruments, components and machinery used in the nuclear industry.

Tell us about your project

What do you
need to protect?

Tell us what you need to pack, how it will travel and when you need it. We can help you choose a case, foam insert or wood crate.

  • Free design and quoting
  • Direct access to our team
  • No obligation to purchase
Prefer to talk?(865) 481-3801

Start your project

Provide a general project description. Do not include CUI or export-controlled information.

PDF, images, CAD files, or ZIP. Up to 5 files, 20 MB each. ZIPs may contain up to 20 files, totaling 20 MB when opened. No password-protected or nested ZIPs.

Use non-sensitive sample files only. Do not attach CUI or export-controlled technical data. Contact our team to arrange an approved transfer method.