Custom protective packaging · Oak Ridge, Tennessee · Since 1991 (865) 481-3801

Research equipment packaging

ATA cases for lab and research equipment.

Custom cases for the journey from laboratory to field site.

Vol Case builds custom ATA road cases for companies developing, testing and transporting research equipment. We plan the enclosure and interior around the instruments, accessories and how they move between laboratories, field locations and demonstrations. We supply cases to companies nationwide.

Plan your case

Free design & quoting. No obligation.

Closed black case with recessed latches and yellow feet.

Custom dimensions

Allow room for the instrument, its supports and all the accessories that travel with it.

Practical access

Choose openings, trays and shelves for loading the equipment and reaching each item.

Equipment changes

Review the case and interior when a prototype, accessory list or transport requirement changes.

Case construction

Build the case around the equipment.

An ATA case uses wood or plastic panels, metal edging and hardware to create a custom enclosure. We choose the panel thickness, finish and hardware for the equipment weight and intended handling.

  • Edges and corners

    Aluminum edging joins and protects the panel edges. Ball corners protect exposed corners during handling.

  • Recessed hardware

    Recessed handles and latches limit protrusions. Their positions need to work with the openings and the supports inside the case.

Explore ATA case construction
Two stacked black cases with recessed handles and an open upper section.

Equipment and handling

Plan loading configuration.

Start with the equipment in its transport condition. Include removable parts and accessories, the total weight and any limits on the outside size of the case.

Support and delicate features
Show where the instrument can rest or be secured. Identify lenses, probes, alignment mechanisms, fittings and controls that need clearance from the foam or case.
Loading and bench access
Tell us how the instrument will be lifted and whether it needs access while it remains in the case. Include room to remove covers and reach equipment at each level.
Laboratory and field conditions
Describe vehicle loading, floor surfaces, doorways, storage and exposure to moisture, dust or temperature changes. Share the equipment manufacturer's handling limits and any required transport tests.
Current equipment version
Provide the current drawings and component list, and identify parts still changing. Include material, cleanliness or static-control requirements so they can be reviewed before approval.

Your options

Choose the interior, openings and handling features.

Each option has a practical job. We combine them around the equipment and the people who will pack, move and unpack it.

Support and organize the contents

  • Foam lining and fitted cutouts

    Foam can line the case or form pockets around individual devices and accessories. PE, PU and XLPE are available in different densities and colors. We choose CNC routing or waterjet cutting to suit the foam and pocket features; PU foam is waterjet cut.

    Explore custom foam
  • Dividers, trays and shelves

    Separate cables, adapters and small parts from the main instrument. Trays and shelves can keep equipment accessible at different levels and support the order in which it is unpacked.

  • Static-sensitive electronics

    Anti-static foam options are available to meet any electrostatic discharge requirements.

Open, move and store the case

  • Hinged lids and removable panels

    A hinged lid stays attached when opened. A removable lid or side panel can provide a clear path to load the device or reach its controls.

  • Latches and locks

    Choose closure hardware for the opening and handling plan. Tell us if locking provisions are required so we can review the available options.

  • Handles and casters

    Options include spring-loaded or telescoping handles and swivel or recessed casters. We choose their arrangement for the loaded weight and how the case will be carried or rolled.

  • Stacking

    Stacking cases allows for more efficient packing in warehouses and trucks. If stacking is needed, we can discuss the stacking configuration and add caster cups to the design.

Common applications

Cases for laboratory instruments and field research kits.

These examples identify different support and access needs. The final design follows your equipment and its packing instructions.

Microscopes and imaging systems

Plan support for the main body while leaving lenses, sensor heads and alignment mechanisms clear. Identify detachable accessories and the manufacturer's required handling and calibration checks.

Read precision instrument packaging guidance

Analytical instruments

For equipment such as spectrometers and chromatographs, identify suitable support points, projecting fittings and parts removed for transport. Share material or cleanliness restrictions before we choose the interior.

Electronic testing equipment

Organize oscilloscopes, signal generators and data acquisition units with their test leads and power accessories. Plan clearance around displays, controls and connectors.

Field research gear

Give portable measurement and data-gathering equipment defined places with the tools and accessories needed on site. Plan what comes out first and how the kit will be checked before the return trip.

Our process

Review the equipment and layout before production.

Design and quoting are free, with no purchase obligation. We work through the case size, access and interior before you approve production.

  1. Provide the current equipment details

    Send dimensions, weights, drawings, 3D models or photographs, plus quantities and the required date. Identify expected design changes. If you need help gathering dimensions, we can discuss measurement arrangements.

  2. Review the design

    Check the openings, supports, foam layout and hardware positions. Review loading and removal with the people who will use the instrument in the laboratory or field.

  3. Check and approve

    We revise the design from your feedback. If a physical prototype would help check fit or handling, we quote it separately. You approve the final design before production.

  4. Build and retain the design

    We build from the approved design and retain it for later orders. Identify the equipment version each time so any changes can be reviewed before the next build.

Timing depends on design changes, materials, quantity, prototype review and approval. Share testing, demonstration or field-work dates early so we can review the delivery schedule.

Side view of a black case with recessed handles, a latch and casters.

Frequently asked questions

Research equipment ATA case questions.

Contact us to discuss product selection, design requirements or an order.

Yes. Send updated dimensions and component details when the equipment changes. We review which pockets or supports need revising and whether the existing enclosure still has enough space. Changes should be reviewed before the next build.

See packaging for evolving defense prototypes

Tell us about your project

What do you
need to protect?

Tell us what you need to pack, how it will travel and when you need it. We can help you choose a case, foam insert or wood crate.

  • Free design and quoting
  • Direct access to our team
  • No obligation to purchase
Prefer to talk?(865) 481-3801

Start your project

Provide a general project description. Do not include CUI or export-controlled information.

PDF, images, CAD files, or ZIP. Up to 5 files, 20 MB each. ZIPs may contain up to 20 files, totaling 20 MB when opened. No password-protected or nested ZIPs.

Use non-sensitive sample files only. Do not attach CUI or export-controlled technical data. Contact our team to arrange an approved transfer method.